Member request for benchmark rates

Home Forums Main Forum Member request for benchmark rates

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • Nancy Esslemont
    Keymaster

    Please respond with any guidance on rates you apply for below electrical service and maintenance tasks –
    1 Quarterly Fire Alarm Service
    2 Annual CCTV service to all cameras / devices any site, 1st DVR up to 16 Channel
    3 DRY RISERS SERVICE (MAJOR)
    4 Annual Emergency Lighting Service (Cost Per Self Contained Fitting)
    5 Annual service and maintenance to all smoke detection within dwelling, to be carried out annually to manufacturer’s instructions, DMBC service report and appropriate certification to be issued to Contract Administrator detailing findings and recommendations. Per Property
    6 S&F Aico Multi Sensor Detector Ei3024
    7 Full Tynetec Reach Install
    8 S&F Tynetec reach, 3 pull cords, 2 mains op smoke detectors, Hush locate switch and all items required to complete install
    9 Supply NVR 16 channel 6000GB
    10 S&F KMS Simplekey 4 System Control unit 37012
    11 Entrotec Vandal resistant Elite panel Four call buttons plus trades
    S&F VRP/E/PSBYR/04S/BZ/L60LE Vandal resistant Elite panel complete with DDA compliant easy to read LCD character display, built in speaker amplifier with volume adjustment. with or without panel mount reader(/ETR), Pressure sensitive buttons, Bevelled style, standard operating instructions, Audio only, Dudley logo & Block Address engraved. Make all necessary connections, undertake tests / commission, provide certificate, make good on completion.
    12 Handset for Entrotec system with nuisance switch & LED (ED3+)
    13 S&F Adams Rite armlock mortice mount 262-005 magnet lock (or equivalent.
    14 S&F Advanced Electronics Mx-4100 Fire Alarm Control Panel, make all necessary connections, undertake tests / commission, provide certificate, make good on completion.
    15 S&F Advanced Electronics Mx-4402 c/w 2 loop cards Fire Alarm Control Panel, make all necessary connections, undertake tests / commission, provide certificate, make good on completion.
    16 S&F Series 65 Optical Smoke Detector, make all necessary connections, undertake tests / commission, provide certificate, make good on completion.
    17 S&F Series 65 Standard Base, make all necessary connections, undertake tests / commission, provide certificate, make good on completion.
    18 S&F XP95 Optical detector, make all necessary connections, undertake tests / commission, provide certificate, make good on completion.
    19 S&F XP95 Detector base, make all necessary connections, undertake tests / commission, provide certificate, make good on completion.
    20 S&F KAC Conventional manual call point (surface mounting), make all necessary connections, undertake tests / commission, provide certificate, make good on completion.
    21 S&F Conventional 24v electronic sounder, make all necessary connections, undertake tests / commission, provide certificate, make good on completion.
    22 Single door & frame Aluminium Doors (Power coated Finish)
    S&F Single door & frame size not exceeding overall width of 1100mm x overall height of 2400mm, include for all potential cut outs for a door entry installation, make good on completion.
    23 Single door & frame Stainless Steel Doors (Power coated Finish)
    S&F Single door & frame size not exceeding overall width of 1100mm x overall height of 2400mm, include for all potential cut outs for a door entry installation, make good on completion.
    24 S&F Non-Maintained Self Contained Fitting
    25 S&F 28Watt 2D Maintained Fitting (IP65)

    Martin Simmonds
    Participant

    Hi

    Just to expand on the above, I am putting together a new specialist contract & need to bench mark a few of the existing rates so I can demonstrate we are still getting value for money with the incumbent contractor

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.